Mục lục nội dung
OVERVIEW
- 42″ Slider Pro
- ARC II 4-Axis Head / Focus for ARC II
- High-Speed & High-Torque Slider Motors
- Interchangeable 24″ Rails / Hard Case
The Ultimate Slider Bundle from Rhino Camera Gear includes the 42 ” stainless steel steel Slider Pro, ARC II 4-axis motorized mind, Rhino Focus for ARC II, and high-speed and high-torque motors. It besides includes exchangeable 24 ” carbon fiber rails for better mobility where applicable, and a hard transport case with indicate compartments for the entire pile. The ARC II is a highly advanced motorized pan and tilt device. With the skidder, slider motors, ARC II, and Rhino Focus, you get a sophisticate 4-axis setup that lets you keyframe motion and rack focus. The high-speed skidder drive is designed for horizontal slides while the high-torque motor is for incline and erect shots.
Rhino Camera Gear Slider Pro (42″)
The 42 ” Pro Slider from Rhino Camera Gear is an ultra-rigid, modular television camera slider that supports loads up to 30 pound. This stainless steel steel skidder is even more rigid than the former version and uses an outsize knob to mount promptly and easily on your tripod, no luger whirl required. Use the Pro Slider with individually available components like the Flywheel for smooth manual slides, the High-Torque Motor for vertical gesticulate, or the Arc II motion control unit. optional carbon roughage rails are available to support versatile fishing gear configurations. The Rhino Pro Slider features all-terrain legs for leveling on about any coat and a 3/8 ” -16 baby buggy screw for mounting your camera or ball head. This 42 ” luger incorporates a center and two end Tripod Quick Mounts. Vertical travel is enhanced by a newly designed end plate with a press-fit pulley climb that eliminates slippage.
Key Features
- 42″ stainless steel rails
- Easy-to-use center and two end Tripod Quick Mounts
- Increased rigidity from previous version
- Interchangeable with separately available rails
- Supports loads up to 30 lb
- New end-plate design for smooth vertical moves
- Use with optional Flywheel, High-Torque Motor, and/or Arc II motion controller
- Camera carriage with 3/8″-16 screw
- Integrated carriage brake
- 3/8″-16 and 1/4″-20 mounting threads
- Folding all-terrain legs
Rhino Camera Gear Arc II 4-Axis Motorized Pan/Tilt Head
Perform smooth, precise, lull camera moves mechanically with this Arc II 4-Axis Motorized Pan/Tilt Head from Rhino Camera Gear. The root Arc II can perform pan and controversy operations, and optional luger and focus options are available individually, making it able of wide 4D operations. It mounts a television camera with/or fluent head using its Manfrotto 501-type immediate acquittance plate and 1/4 ” -20 and 3/8 ” -16 screw options. The head can support a cinema camera rig up to 15 pound in slant, and its motors are ultraquiet.
Powerful Arc II features include time-lapse, light-lapse mode that performs night-to-day time-lapse, facial track, keyframe presets, and television camera power options. The head integrates seamlessly with Rhino sliders therefore apparatus with another axis is a breeze. You can control the modes and movement of the Arc II using the integrate joysticks, or you can utilize radio iOS control with an Arc II control app. To baron the Arc II, it features inner 4400mAh lithium-ion batteries that are charged using the included external charger kit. It besides features a power-saving mode and automatically shuts down when it ‘s not in use for 15 minutes. It can operate via an optional skidder at up to a 90° angle with up to 5 to 15 pound rig slant and a individually available high-torque motor.
Key Features
- Up to 4-axis head with pan and tilt built-in; slide and focus are optional
- 15 lb load capacity
- Ultraquiet motor operation
- Real-time control of Arc II using iOS via wireless or by using the onboard joysticks
- Presets using keyframes for creating repeatable shots
- Can be used vertically with an optional high-torque motor
- Manfrotto 501-type quick release camera plate with 1/4″-20 and 3/8″-16 mounting screws
- One 3/8″-16 mounting thread on the bottom
- Powers using built-in lithium-ion batteries and charges with included 2.1mm barrel adapter and international charging kit
- Powers down after 15 minutes of idle time to save battery life
- Automatic face tracking technology
- Time-lapse with night-to-day light-lapse feature
- Power your camera using Arc II power with an optional cable
- Easy to set up and fully compatible with Rhino Gear tripods and slider
Rhino Camera Gear Focus for Arc II
The Focus for Arc II from Rhino Camera Gear enables you to add preciseness focus moves to your Arc II gesticulate control shots. suitable for both luger and tripod use, the Rhino Focus works by shifting focus mechanically between your two chosen keyframes. This focus system features a cine-standard 0.8 MOD gear and mounts via its 15mm carbon fiber rod. It besides includes an adjustable rubber eraser lens gear and a exponent cable.
Rhino Camera Gear High Speed Slider Motor
Outfit your camera skidder for high-speed shots with this High Speed Slider Motor from Rhino. This high-speed centrifugal can attach to any Rhino luger and can connect to the Arc II for television camera automation. The low-profile drive can move a 5 pound warhead at a 20° fish and can move at 5 ” per second. Both 24 and 42 ” centrifugal cables are included with the motive.
Rhino Camera Gear High Torque Slider Motor
Outfit your television camera luger for vertical-torque shots with this High Torque Slider Motor from Rhino. This high-torque motor can attach to any Rhino luger and can connect to the Arc II for television camera automation. The low-profile motor can move a 10 pound load at a 90° angle and can move at 1 ” per second. Both 24 and 42 ” centrifugal cables are included with the motive.
Rhino Camera Gear Interchangeable Carbon Slider Rails (24″)
This pair of interchangeable Carbon Slider Rails from Rhino Camera Gear enables you to easily change the distance and load capacitance of your Rhino luger. The 24 ” lightweight rails are constructed of precision-ground carbon fiber and are ultra-rigid, supporting up to 15 pound. A center Tripod Quick Mount enable you to promptly mount the rails.
Features
- 24″ lightweight carbon fiber rails
- Easy-to-use Tripod Quick Mount in the center
- Supports loads up to 15 lb
Rhino Camera Gear Hard-Shell Slider Carrying Case
The dedicated Hard-Shell Slider Carrying Case is designed to safely transport your Rhino Camera Gear skidder and its accessories. Constructed of aluminum and a composite, this locking case features a adjourn clear manage and wheels. It is lined with high-density EVA foam and has four accessory pockets in its eyelid. This hard-shell event will fit your 24 or 42 ” Rhino skidder, exchangeable rails, Rhino Arc II pan/tilt head, Rhino Focus unit, both High Speed and High Torque Motors, and Ultra-Fast Charger.
Fits
- Rhino slider (24 or 42″)
- Interchangeable rails (24 or 42″)
- Rhino Arc II
- Rhino Focus
- Rhino motor (both high speed and high torque)
- Ultra-fast charger
SPECS
Rhino Camera Gear Slider Pro (42″) Specs
performance
Load Capacity | 30 pound / 13.61 kilogram |
Mounting
Tripod Mounting |
3 x 1/4 ” -20 Female Thread 3 x 3/8 ” -16 Female train of thought |
rail
Material | Stainless Steel |
baby buggy
Camera Mounting Screw | 3/8 ” -16 Male |
physical
Track Length | 42 ” / 106.68 curium |
Weight | 11.1 pound / 5.03 kilogram |
Packaging Info
Package Weight | 12.5 pound |
Box Dimensions (LxWxH) | 47 ten 9 ten 3 ” |
Rhino Camera Gear Arc II 4-Axis Motorized Pan/Tilt Head Specs
Plate Type | Manfrotto 501 |
Load Capacity | horizontal : 15 pound / 6.8 kg When at 90° Tilt from Center : < 5 pound / < 2.3 kilogram When at 45° Tilt from Center : 5 to 15 lb / 2.3 kilogram to 6.8 kg |
Bottom Thread Size | 3/8 ” -16 |
Camera Mounting Screws | 1/4 ” -20 and 3/8 ” -16 |
Panning Range | 360° 1 ten Single Rotation Cable limitation |
Tilting Range | 180°, ±90° with Rig Weight < 5 pound / 2.3 kg 90°, ±45° with Rig Weight > 5 pound / 2.3 kilogram |
Pan Speed | 19°/s utmost |
Tilt Speed | 7.5°/s maximal |
Battery | 2 ten Built-In 7.4 V Lithium-Ion Batteries |
Battery Capacity | 29.6 Wh, 4000 mAh |
Power Save | Powers down If idle 15 Minutes |
Power Input | 1 ten 2.1 millimeter DC Barrel 12 VDC, 4A |
Operating Temperature | 0 to 110°F / -17 to 43°C |
Dimensions | 8.25 ten 5.5 adam 4 ” / 21 adam 14 ten 10.2 centimeter |
Weight | 5.7 pound / 2.6 kilogram |
Packaging Info
Package Weight | 7.955 pound |
Box Dimensions (LxWxH) | 13.1 ten 9.2 adam 5.3 ” |
Rhino Camera Gear Focus For Arc II Specs
physical
Gear Mod | 0.8 |
Rod Diameter | 0.59 ” / 15 millimeter |
Material of Construction | gat : carbon paper Fiber |
Dimensions | 4 x 1.5 ten 1.5 ” / 102 adam 38 ten 38 millimeter |
Weight | 9 oz / 255 gravitational constant |
Packaging Info
Package Weight | 0.995 pound |
Box Dimensions (LxWxH) | 8.6 ten 5.5 ten 3 ” |
Rhino Camera Gear High Speed Slider Motor Specs
Speed | 5 ” / sec |
Load Capacity | 5 pound at 20° Angle |
Motor Connector | 1 x RJ45 |
Weight | not Specified by Manufacturer |
Packaging Info
Package Weight | 2.32 pound |
Box Dimensions (LxWxH) | 7.7 ten 6.4 x 4.8 ” |
Rhino Camera Gear High Torque Slider Motor Specs
Speed | 1 ” / secant |
Load Capacity | 10 pound at 90° Angle |
Motor Connector | 1 x RJ45 |
Weight | not Specified by Manufacturer |
Packaging Info
Package Weight | 2.32 pound |
Box Dimensions (LxWxH) | 7.5 x 6.4 ten 4.7 ” |
Rhino Camera Gear Interchangeable Carbon Slider Rails (24″) Specs
physical
Material of Construction | Carbon Fiber |
Payload Capacity | 15 pound / 6.8 kilogram |
Length | 24 ” / 61 curium |
Weight | 1 pound / 454 gram |
Packaging Info
Package Weight | 1.69 pound |
Box Dimensions (LxWxH) | 24.8 ten 6.3 ten 2.6 ” |
Rhino Camera Gear Hard-Shell Slider Carrying Case Specs
Material of Construction | Aluminum, Composite, EVA Foam |
Dimensions | 48 ten 18 ten 6 ” 122 x 46 ten 15 centimeter |
Weight | 15.3 pound / 6.9 kilogram |
Packaging Info
Package Weight | 15.7 pound |
Box Dimensions (LxWxH) | 49.75 ten 18 adam 6.75 ” |